Solar Panel Cleaning Chemical

Product Details:

Highly concentrated TetraClean cement and inorganic dirt remover. 
The action of TetraClean cement remover eliminates all residues of cement, grout and varnish, without changing the colour of joints and restoring the original appearance to treated surfaces. It is also highly effective on removing inorganic dirt and brick efflorescence.

How to use :1) Remove loose dust from surface 2) Wait for some time to let it dry3) Spray by dilution 1 + 4 on surface and rub with nylon brush4) leave it for 5-10 minutes5) Rub again with the brush & rinse with water6) If the result is only partially achieved, repeat the application process one more time.
Before applying the product to the whole surface, always test a small, unexposed area or unused piece to check its suitability for use. 
Caution : Keep away from children & pet. Avoid contact with eyes, In case of contact with eyes rinse immediately with plenty of water and seek medical attention. Store in cool and dry place. 

Additional Information:

• Production Capacity: 50000
• Delivery Time: 7 Days
• Packaging Details: 5 L Can and 50 L Drum Packing

Product Details:

For quick response you can directly 

• TetraClean Solar Panel Cleaning Chemical is highly effective Solar Plates cleaning solution & works Instantly.
• It Removes foreign deposits brought on by Industrial flash over, dust, dirt & stains from your “Solar Plates”.
• Effective for all types of Solar panels and specially formulated for Solar Panel Installation in Cement Industries & other heavy dust & stains.
• Recommendation - Use in every 30-45 days to avoid tick deposition of dust, dirt, stain & cement.
• Frequent application will help you to reduce the cost of maintenance.

Steps for first time cleaning / for heavy deposit of dust or stains –

- First wash panel with normal water to remove loose dust

- Leave it for 2 minute so that the panel gets dry

- Spray our Heavy duty Tetraclean solar panel cleaner (TSPC 1) directly on the panel

- Rub with soft Nylon Brush

- Leave it for 2-3 min and rub again with nylon brush

- Wash panels with normal water

 

Steps for regular cleaning of solar panels –

- Wash panel with normal water to remove loose dust

- Dilute TSPC 1 in 1:10 ration. Example –TSPC 1 litre + 9 litre water

- Spray diluted liquid on panel and rub with nylon brush (normal rubbing)

- Wash panel with normal water

- Repeat this process after every week for best result.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7 Days
• Packaging Details: 50 L Carboy Packing

Product Details:

Tetraclean (TSPC-OR1) Organic Heavy duty solar panel cleaning liquid specially formulated to remover cement dust, lime dust, coal dust and other heavy dust particles. It also removes hard water, stains, Oil, Grease etc. Effective for all types of solar panels and specially formulated for plant installed in cement industries, refinery process plant, mining area and other heavy pollution industries. 

How to use :1) Remove loose dust from the surface. 2) Wait for some time to let it dry. 3) Spray liquid diluted in 1+4 to 1+9 ration (Example- 1 L TSPC OR1 & 4 -9 L water) on the surface and rub with nylon brush, 4) leave it for 1-2 minutes   5) Rub again with the brush & rinse with water  6) If the result is only partially achieved, repeat the application process one more time.

Additional Information:

• Production Capacity: 20000 L
• Delivery Time: 7 Days
• Packaging Details: 5 L can and 50 L carboy Packing

Product Details:

TetraClean ( TSPC-4 ) Heavy-duty solar panel cleaning liquid specially formulated to remove Iron, Steel, metal, Aluminium, Rust. Effective for all types of solar panels & specially formulated for plants installed near industrial and manufacturing area.

How to use: 1) Remove loose dust from the surface. 2) Wait for some time to let it dry. 3) Spray liquid diluted in 1+4 rati on the surface and rub with a nylon brush (Example- 1 L TSPC 4 & 4 L water), 4) leave it for 3-5 minutes, 5) Rub again with the brush & rinse with water  6) If the result is only partially achieved, repeat the application process one more time.

Additional Information:

• Item Code: TSPC4
• Production Capacity: 20000
• Delivery Time: 7 Days
• Packaging Details: 5 L Can and 50 L Carboy

Product Details:

Procedure Of Use:

• Remove loose dust from solar panel
• Wet panel with normal water
• Spray liquid on solar panel by mixing of 1:1 water
• Leave chemical for 2-3 minute on panel
• Rub smoothly with soft nylon brush 
• Wash panel with plain water and wipe it gently

 

Dwell Time:

• Dust/Dirt/Debris/Grime remover's usual dwell time is between 2 to 5 minutes and it can then be either wiped out or pressure wash

 

Recommendation:

• 45 days to avoid thick deposition of Dust/Dirt/Debris/Grime
• Frequent application will help you to reduce cost of maintenance

 

Note:

• Effective for all types of solar installation except cement plants or chemical based industrial areas

 

Caution:

• Keep away from children and pet.
• Avoid contact with eyes, in case of contact with eyes rinse immediately with plenty of water and seek medical attention.
• Store in cool and dry place.