Mold Release Agents

Product Details:

Silicone Free Rubber Mould Release Agents
(Release Lubricant for Rubber Hose & Tube Products)

TetraClean water-based release lubricants for rubber hose and tube production, this range of lubricants includes effective mandrel release agents & mandrel lubes for rubber hoses.

TetraClean release agents are designed to meet the strict standards of the most critical hose systems in the automotive & industrial hose manufacturing industry.
Suitable for all common rubber types including EPDM, NR, NBR, NBR/PVC, CR, CSM, SBR, ECO, FKM, Vamac, Acrylic, and Silicone.
Mould Release Application Method: Spray, Dip, Brush, Swab, Extrusion Injection. Use direct or diluted depends on different types of product.
Product characteristics


- Silicone and solvent free- Excellent release and lubrication properties- Temperature stable up to at least 250°C- Suitable for cold and hot forms / mandrels- Good relubricate effect on the mandrel after    vulcanisation in the autoclave- Good water solubility during the cleaning of the moulded parts (In hot & cold water and soft & hard water)- Promptly biodegradable release agent- Suitable for all common rubber types

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7 Days
• Packaging Details: 50 L drum packing

Product Details:

Silicone Free Rubber Mould Release Agents
(Release Lubricant for Rubber Hose & Tube Products)

TetraClean water-based release lubricants for rubber hose and tube production, this range of lubricants includes effective mandrel release agents & mandrel lubes for rubber hoses.

TetraClean release agents are designed to meet the strict standards of the most critical hose systems in the automotive & industrial hose manufacturing industry.
Suitable for all common rubber types including EPDM, NR, NBR, NBR/PVC, CR, CSM, SBR, ECO, FKM, Vamac, Acrylic, and Silicone.
Mould Release Application Method: Spray, Dip, Brush, Swab, Extrusion Injection. Use direct or diluted depends on different types of product.
Product characteristics


- Silicone and solvent free- Excellent release and lubrication properties- Temperature stable up to at least 250°C- Suitable for cold and hot forms / mandrels- Good relubricate effect on the mandrel after    vulcanisation in the autoclave- Good water solubility during the cleaning of the moulded parts (In hot & cold water and soft & hard water)- Promptly biodegradable release agent- Suitable for all common rubber types

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7 Days

Product Details:

TetraClean concrete, tile and block release agent is the wax suspension liquid. In the cement de-moulding industry, a dense polymer film can be formed on the surface of the mould to achieve the function of isolating the product and the mould, which can improve the apparent quality of cement products, protect the mould, and has the characteristics of environmental protection & non-toxicity.

The release compound used in the following areas :- Manufacturing decorative tiles, Concrete Blocks- Construction of canal lining, roads, bridges, piers- Used in areas which are difficult to cure like vertical or sloping surfaces

How to apply -

- Before applying mould release agent, clean the mould & make sure there should no rust particles & concrete scale.- Apply mould release agent by with brush or directly by spraying on the mould. - After the release agent dries, the concrete can be poured.- The template coated with release agent should be protected from rain before use. If it is exposed to rain, it should be repainted with release agent.

Product characteristics - Silicone free and water soluble- Excellent release and lubrication properties- Good water solubility during cleaning of mould- Promptly biodegradable release agent

Attention -1. Before use, the mold release agent and water should be stirred evenly in a ratio of 1:2.2. When using the release agent, brush evenly & never miss the brush.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 7 Days